Stainless steel connection elements for chimney systems
The 0.5 mm stainless steel connection elements are used for connecting boilers powered by any type of fuel (coal, wood, pellets, gas, condensing boilers etc.) or fireplaces to the chimney system. They are made of 304 stainless steel, that guarantees long-term resistance to corrosion caused by tar. The elements used in high efficiency heat sources, where gas combustion temperature does not exceed 200°C, are equipped with a sealing gasket made of temperature resistant silicon.
| Stainless steel pipe + gasket | Dimensions (D x L x T) |
|---|---|
 | 80mm x 0.3m x 0.5mm |
| 100mm x 0.3m x 0.5mm | |
| 80mm x 0.5m x 0.5mm | |
| 100mm x 0.5m x 0.5mm | |
| 80mm x 1m x 0.5mm | |
| 100mm x 1m x 0.5mm |
D = Diameter, L = Length, T = Thickness stainless steel
| Tee 90° + gasket | Dimensions (D x T) |
|---|---|
 | 80mm x 0.5mm |
| 100mm x 0.5mm |
D = Diameter, T = Thickness stainless steel
| Tee 45° + gasket | Dimensions (D x T) |
|---|---|
 | 80mm x 0.5mm |
| 100mm x 0.5mm |
D = Diameter, T = Thickness stainless steel
| Elbow 90° + gasket | Dimensions (D x T) |
|---|---|
 | 80mm x 0,5mm |
| 100mm x 0,5mm |
D = Diameter, T = Thickness stainless steel
| Elbow 45° + gasket | Dimensions (D x T) |
|---|---|
 | 80mm x 0,5mm |
| 100mm x 0,5mm |
D = Diameter, T = Thickness stainless steel
| Connector + gasket | Dimensions (D x T) |
|---|---|
 | 80mm x 0,5mm |
| 100mm x 0,5mm |
D = Diameter, T = Thickness stainless steel
| Bracket with spike | Dimensions (D) |
|---|---|
 | 80mm |
| 100mm |
D = Diameter
| Fastening clamp | Dimensions (D) |
|---|---|
 | 80mm |
| 100mm |
D = Diameter
| Rosette | Dimensions (D x T) |
|---|---|
 | 80mm x 0.5mm |
| 100mm x 0.5mm |
D = Diameter, T = Thickness stainless steel
| Drain plug | Dimensions (D x T) |
|---|---|
 | 80mm x 0.5mm |
| 100mm x 0.5mm |
D = Diameter, T = Thickness stainless steel
| Rain cap | Dimensions (D x T) |
|---|---|
 | 80mm x 0.5mm |
| 100mm x 0.5mm |
D = Diameter, T = Thickness stainless steel